|
| ENGINEERING
|
PROJECT :
Education: BS in an Engineering discipline. MS or MBA preferred. Project Management
Professional (PMP) certification from the Project Management Institute highly preferred
Experience:
10+ years of new product development project management experience with a technical
manufacturer, preferably involving machining, molding, and electrical assembly/test.
Demonstrated experience in Six Sigma tools, Lean Manufacturing, Project Management
Software.
Responsibilities:
Basic responsibilities are to ensure the success of new product development and commercial
introduction by coordinating with all levels of management. Develops and uses metrics to analyze trends, determine root causes for any deviations, recommend corrective action where required, and implement systems and procedures to prevent reoccurrence. Responsible for identifying and planning for all resources required to ensure new products meet required production and cost constraints.
|
| Salary: $60-90,000 plus full benefit package |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
 |
PROCESS/PROJECT ENGINEER- BSME, BSChe or equivalent work experience and 6 plus years experience in chemical, food, or other process environments. Will proved support on new projects and facilitate the development and transition of new products and processes from development to manufacturing.. Will select process equipment for continuous process.
|
| Salary: 65-80,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
DESIGN ENGINEERS- BS Engineering and 10 years experience. MS helpful. Experience in design of highly technical mechanical, electro-mechanical or electronic products. 3D modeling software, GTD training, machining and assembly experience and good understanding of both electrical and mechanical design inputs.
|
| Salary: 50-80,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
DIRECTOR OF MANUFACTURING ENGINEERING- BS in Electrical, Mechanical or Industrial Engineering, MS or PhD preferred. PE or MBA a plus. Must possess strong leadership qualities and strong Project Management skills. Good understanding of both electrical and mechanical design inputs. Excellent knowledge of technology including DFSS, DFM, error proofing statistics, DOE GD&T and lean manufacturing techniques. Compensation 90-120k
|
| Salary: 90-120,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
MANUFACTURING ENGINEERS- BS Eng. or 5 years equivalent experience. Should have experience in high volume, precision manufacturing processes and assembly. Provides support and training with regard to assembly methods, test procedures, ISO 9001 documentation, production equipment, etc.
|
| Salary: 50-70,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
CONTROLS ENGINEER- BSEE and experience in various PLC control systems . Able to program PLC applications and HMI interfaces from a variety of manufacturers. Focus is around Rockwell RS Logix 5000 family of PLC and the Factory Talk View Studio HMI software platform. |
| Salary: 60-80000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
BS Degree in Engineering or eqivalent. Advanced degree a plus. Three to five years or more in manufacturing with lean experience.
Responsible for leading Kaizen events, supporting project teams, audit lean implementations, lead value stream mapping, and training employees in lean initiatives. |
| Salary: $60-80,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
The position is responsible for the Project Management of large industrial capital equipment/facilities renovations and upgrades and will lead team of mechanical, electrical(power and controls) and structural engineers as project requires. Must have strong communications and demonstrated leadership skills.
BS Mechanical or other engineering discipline is required along with experience in plant/facilities or consulting engineering; An MS, PE or PMP is desirable. Must also have strong customer interface skills.
|
| Salary: $85-110,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
ELECTRICAL ENGINEER- BSEE and a mimimun of 5+ years experience as a control systems engineer. Experience with process and motor control systems and general knowledge of applicable standards such as IEC, UL, and National Electric Code. PLC programming/troubleshooting experience with A/B and others. P&ID knowledge helpful. $60-80,000
|
| Salary: $80-85000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
Central New York State company needs a Sourcing Engineer with foundry and casting experience. The casting experience can be either ferrous or non-ferrous and any type of casting. Experience in sand casting would be a major plus.
Position will work with Sourcing Manager in "make or buy" derteminations of major components. It will also include the determination of which foundries should be utilized when "buy" decisions are made. Some international travel is required. Experience in sourcing is not necessarily required.
Company is a division of a Fortune 300. Excellent benefit and relocation package provided. |
| Salary: $75-85,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
Position: Manufacturing Engineer
Description:
Perform a wide variety of duties to devise, plan and apply the most efficient methods in the machining, fabricating, and assembly of a variety of parts, units, and products, consistent with quality standards, production schedules, equipment capability and availability.
Several poisitions available. EXperience can be in machining, precision assembly, metal stamping, or electro/mechanical areas,
Qualifications:
• AAS Degree in a technical major required, preference will be given to BS degrees in Mechanical or
Industrial Technology.
• 2 – 5 years related experience in a machine shop/assembly environment.
• Excellent verbal, written communication skills.
• Able to collaborate and interact with manufacturing personnel to resolve difficult problems.
• Demonstrated capital equipment evaluation / justification experience strongly desired.
• Demonstrated experience and aptitude in designing plant layout and workflow.
Technical skills / Special requirements
• Demonstrated computer skills (Microsoft office environment, internal network).
• Machine programming experience, CAD/CAM, Pro E necessary.
• Work environment will consist of regular exposure in a manufacturing setting.
• Must be able to provide proper documentation for occasional international / domestic travel.
|
| Salary: 50,000-80,000 DOE |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
| BS in Enginering and experience in the Industrial/Commercial segments. Position could lead to a permanent position. |
| Salary: $40-70,000 DOE |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
Postion requires experience in Structural Engineering within the Industrial/Commercial areas. A BS in Civil or Mechanical Engineering is required and a PE is desireable. The ideal leader will be a strong leader with good communication skills and the ability to work in a team environment. Position will supervise several engineers/drafters.
Company will relocate for the right candidate.
|
| Salary: $85-100,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
| BSEE and a minimum of 5-10 years design experience in power distribution and Industrial/Process electrical systems. The ideal candidate will be a strong leader with good communication skills and the ability to work in a team environment. |
| Salary: $70-100,000 DOE |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
BS/MS Engineering. PE desireable. Position is responsible for supervision of staff of 5-15 engineers/drafters. Experience in design of heavy industrial facilities required(ie-Chemical, Manufacturing, Food, Steel).
Company will relocate right candidate |
| Salary: 85-100,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
| Minimum of 4 years experience as Electrical, Control System or Instrumentation Engineer in instrumentation, tranducer, or any other sensor related field. BSEE required, MSEE helpful. Must be a US citizen or Perm. Resident. |
| Salary: $60-85,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
The Electrical Engineer will provide electrical and electronic engineeering, process and machine controls expertise. Responsibilities include providing electrical/electronic design, 24/7 troubleshooting for PLC's and other computerized equipment, programming for operator graphical interfaces, generation and maintaining AutoCAD drawings, providing support for preventive maintenance and calibration for smart sensor and standard analog sensors.
Requirements
BS Electrical/Electronics Engineering, strong computer skills, CAD profecient, Allen Bradley PLC Programming, Panelview, Microsoft Windows and ability to work in a team environment. Experience in industrial/manufacturing plant environment working with production or process equipment. Working knowledge of industrial power distribution and NEC is preferred. Must be able to work on own with minimal supervision.
|
| Salary: $65-80,000 |
| Contact: Richard Pedersen (rich@pkajobs.com) |
|
|
Back to Job Listings
|
|
